Mohammad Askari; Nikoo Darestani Farahani; Mehdi Bakhshzad Mahmoudi; Fereydoun Abbasi Davani
Abstract
Metal surface cleaning or etching techniques using reactive plasma are emerging as one of the dry processing techniques for surface contaminants with high bond energy, especially for cleaning and decontamination of nuclear components and equipment. In this study, the plasma reaction due to the discharge ...
Read More
Metal surface cleaning or etching techniques using reactive plasma are emerging as one of the dry processing techniques for surface contaminants with high bond energy, especially for cleaning and decontamination of nuclear components and equipment. In this study, the plasma reaction due to the discharge of a dielectric barrier of a mixture of 95% helium and 5% fluorine with cobalt oxide film (Co3O4) grown on the surface of stainless steel 304 was studied experimentally. Experimental results show that cobalt oxide becomes a powder after plasma irradiation and is easily separated from the surface of the base metal. The optimal plasma generating conditions of the dielectric barrier discharge used in this experimental study were obtained at atmospheric pressure, voltage 4.5 kV, and frequency 25 kHz with an etching rate of 10.875 μmol.min-1. The samples were analyzed before and after plasma irradiation, using Scanning Electron Microscopy with Energy Dispersive X-ray spectroscopy and the purification rate was performed using a sequential weighting of the samples with scales 10-4 g accurately obtained. The results show the ability of this method to effectively remove the surface contamination of cobalt from the surface of stainless steel 304.
Sajad Hajikhani; Ramin Mehrabifard; Hamed Soltani Ahmadi
Abstract
Plasma technology has undeniably revolutionized industrial processes in recent decades. Atmospheric pressure plasma (APP) has emerged as a prominent and widely applicable tool in various scientific disciplines. Notably, plasma-assisted flow control has become a subject of intense interest, particularly ...
Read More
Plasma technology has undeniably revolutionized industrial processes in recent decades. Atmospheric pressure plasma (APP) has emerged as a prominent and widely applicable tool in various scientific disciplines. Notably, plasma-assisted flow control has become a subject of intense interest, particularly applying surface dielectric barrier discharge (SDBD) plasma actuators for aerodynamic flow control. In this study, a two-dimensional model of the SDBD plasma actuator is developed using the COMSOL Multiphysics program, incorporating air gas discharge reactions with N2/O2/Ar gases in specific ratios (0.78, 0.21, 0.01). The investigation focuses on the impact of dielectric materials (mica, silica glass, quartz, and polytetrafluoroethylene (PTFE)) on plasma characteristics and body force within the plasma actuator under constant input parameters. Moreover, the study explores how variable pressure (760, 660, and 560 torr) in different applications influences plasma properties, ultimately affecting the magnitude of the body force in the plasma actuator. These findings contribute to optimizing plasma technology for flow control applications and enhance industrial efficiency and performance.
Ramin Mehrabifard
Abstract
Dielectric barrier discharge (DBD) plasma is used for various applications. DBD is also one of the most efficient and low-cost methods for active fluid flow control. In this study, a detailed physical model of DBD in atmospheric pressure at 1 kV DC voltage is developed with COMSOL Multiphysics software. ...
Read More
Dielectric barrier discharge (DBD) plasma is used for various applications. DBD is also one of the most efficient and low-cost methods for active fluid flow control. In this study, a detailed physical model of DBD in atmospheric pressure at 1 kV DC voltage is developed with COMSOL Multiphysics software. Argon gas is also used as a background gas and electrodes are assumed to be copper. Plasma parameters such as electron and ion density, electric field, potential, and temperature for different gap distances of electrodes (1.0 mm, 0.9 mm, 0.8 mm) and different dielectric types (Quartz, Silica Glass, Mica). The results of the simulation show that the longitudinal distance of the grounded electrodes to the power electrodes has a direct influence on parameters such as electron temperature, and electron and ion density which are the main factors of fluid flow control. These parameters have the maximum value when Mica is used as a dielectric and the lowest value when Silica Glass is utilized.