Mohammad Amin Amirkhani; Mostafa Hassanzadeh; Safar Ali Safari
Abstract
Spallation process is the most significant process for neutron generation in industry and medicine. This process has been used in the subcritical reactor core. In this research, we study the neutronic behavior of non-fissionable and fissionable spallation targets consists ...
Read More
Spallation process is the most significant process for neutron generation in industry and medicine. This process has been used in the subcritical reactor core. In this research, we study the neutronic behavior of non-fissionable and fissionable spallation targets consists of U-238, Th-232, Lead Bismuth Eutectic (LBE) and W-184 materials in cylindrical and conic shapes using MCNPX code. Neutronic parameters consist of spallation neutron yield, deposition energy, and angular spectrum of the neutron output. The gas production rate and residual mass spectrum were investigated. The results of this research indicate that the shape of the target must be selected based on target material and operational purposes. The number of neutrons per energy unit is stable at energies higher than 1 GeV, and the rate of change in neutron generation has been reduced after that. Furthermore, hydrogen is the principal factor in swelling of spallation target and consists of about 88% of gas production. It was found that a target of LBE provides the most favorite parameters for both neutronic and physical properties.
Ehsan Boustani; Samad Khakshournia
Abstract
A second shutdown system (SSS) is designed for the Tehran Research Reactor (TRR) completely independent and diverse from the existing First Shutdown System (FSS). Given limitations, specifications, and requirements of the reactor, the design of SSS is based ...
Read More
A second shutdown system (SSS) is designed for the Tehran Research Reactor (TRR) completely independent and diverse from the existing First Shutdown System (FSS). Given limitations, specifications, and requirements of the reactor, the design of SSS is based on the injection of liquid neutron absorber. The plan has the ability to satisfy the major criterion of required negative reactivity worth, to transfer the reactor to subcritical state in needed time, with necessary shutdown margin and for the required duration. Design calculations are performed using the stochastic code MCNPX2.6.0, deterministic code PARET and Pipe Flow Expert software. The ORIGEN2 code and HotSpot health physics code are also used for simulation of environmental pollution release. The SSS chambers cause a decrease of about 5% and 15% in total and thermal neutron flux, respectively. To demonstrate the SSS role in enhancing reactor safety, the probable accident of core meltdown is investigated. As a consequence of this accident, the radioactive pollution in and out of reactor containment is released. Without existing the SSS and in case of failure of FSS, the residents within 58000 m2 of the reactor perimeter would receive about 1 mSv which is more than the annual limit of absorbed dose for the community.