Shahryar Malekie; Seyed Musa Safdari; Sedigheh Kashian; Morteza Akbari
Abstract
Polycarbonate-bismuth oxide composite has been used as a beta-ray sensor in the previous works. Calculation of two main quantities namely stopping power and range of electrons in this material can be useful to evaluate the optimal thickness of the sensor. Thus, in this study, the range of electrons and ...
Read More
Polycarbonate-bismuth oxide composite has been used as a beta-ray sensor in the previous works. Calculation of two main quantities namely stopping power and range of electrons in this material can be useful to evaluate the optimal thickness of the sensor. Thus, in this study, the range of electrons and stopping power of polycarbonate/bismuth oxide composite for several pure beta-emitters were estimated using the ESTAR program. Simulation findings indicated that the amount of concentration of the heavy metal oxide particles into the composite is an important factor to determine the range and stopping power of the electrons. Also, in the experimental phase, the response of the 50 wt% nanocomposite with thickness of 1 mm against the beta-rays of the P-32 source at the average energy of 695 keV in different activities was measured using an electrometer at a constant voltage of 800 V. Results showed that the response of the sample ranging from 4 to 6 mCi was linear with R2= 0.9757.
Saba Khatami; Mohammad Mahdavi; Sohail Khoshbinfar
Abstract
In this research, the effect of deuterium beam energy distribution function resulting from TNSA and RPA mechanisms on the fast ignition of D/He-3 fuel pellet has been investigated. The fuel is irradiated with a deuterium beam through a conical guide. The energy distribution function will be different ...
Read More
In this research, the effect of deuterium beam energy distribution function resulting from TNSA and RPA mechanisms on the fast ignition of D/He-3 fuel pellet has been investigated. The fuel is irradiated with a deuterium beam through a conical guide. The energy distribution function will be different in different mechanisms. Penetration depth and stopping power of ignitor beam with mono- energy, Maxwellian and Gaussian distribution of energy are calculated. Calculations show that the Maxwellian beam from TNSA mechanism, penetrates up to about 100 μm in the fuel and the height of deposition peak is still in plasma corona. The height of the peak has also increased about 25 times compared to the case where the Gaussian beam is considered. Also, the obtained results are shown that the energy deposit of the deuterium beam resulting the RPA mechanism will be completely localized and will be more concentrated in the dense fuel core.
