Morteza Akbari; Farrokh Khoshahval
Abstract
In this research, the governing dynamic equations of the Bushehr NPP core are studied and modeled using Matlab (Simulink) software. The point kinetic equation with the temperature feedbacks and the fuel-coolant energy balance equations in the time domain were used for this purpose. The model is validated ...
Read More
In this research, the governing dynamic equations of the Bushehr NPP core are studied and modeled using Matlab (Simulink) software. The point kinetic equation with the temperature feedbacks and the fuel-coolant energy balance equations in the time domain were used for this purpose. The model is validated against the rod drop accident data available in BNPP-1 FSAR, and they agreed. Then, this time-domain model is used to find the maximum movement speed of the control rods. For this goal, linear and non-linear rod movement equations have been modeled. In this regard, the maximum withdrawal speed of the working bank (H10) with a worth of 1.1 dollars has been investigated. Using the linear CR model, a speed limit of 9 cm.s-1 has been obtained to prevent the initiation of a reactor trip. The maximum speed using the non-linear model of the CR was found out to be dependent on its initial position. Thus, in three positions of the H10 bank: 100%, 80%, and 50% of the length inside the reactor, the maximum withdrawal speed values were valuated 11.5, 7.7, and 4.4 cm.s-1 respectively. According to the results, among the reactor parameters including power, period, and fuel temperature, which are monitored by the reactor protection system to initiate the reactor trip, the reactor power is the limiting factor for specifying the maximum withdrawal speed. This study is performed using time domain analysis, and the obtained results are consistent with the results reported in the previous research using Laplace transform approach.
Shahryar Malekie; Seyed Musa Safdari; Sedigheh Kashian; Morteza Akbari
Abstract
Polycarbonate-bismuth oxide composite has been used as a beta-ray sensor in the previous works. Calculation of two main quantities namely stopping power and range of electrons in this material can be useful to evaluate the optimal thickness of the sensor. Thus, in this study, the range of electrons and ...
Read More
Polycarbonate-bismuth oxide composite has been used as a beta-ray sensor in the previous works. Calculation of two main quantities namely stopping power and range of electrons in this material can be useful to evaluate the optimal thickness of the sensor. Thus, in this study, the range of electrons and stopping power of polycarbonate/bismuth oxide composite for several pure beta-emitters were estimated using the ESTAR program. Simulation findings indicated that the amount of concentration of the heavy metal oxide particles into the composite is an important factor to determine the range and stopping power of the electrons. Also, in the experimental phase, the response of the 50 wt% nanocomposite with thickness of 1 mm against the beta-rays of the P-32 source at the average energy of 695 keV in different activities was measured using an electrometer at a constant voltage of 800 V. Results showed that the response of the sample ranging from 4 to 6 mCi was linear with R2= 0.9757.
Shahryar Malekie; Sedigheh Kashian; Seyed Musa Safdari; Morteza Akbari; Arjang Shahvar
Abstract
In this experimental work, Polycarbonate/Bismuth Oxide (PC-Bi2O3) nanocomposites were prepared in various concentrations of 0, 10, 30, and 50 wt% with thicknesses of 1 mm and irradiated by a pure beta-emitter source of Sr-90. To fabricate the electrodes, copper sheets with thickness of 100 µm were ...
Read More
In this experimental work, Polycarbonate/Bismuth Oxide (PC-Bi2O3) nanocomposites were prepared in various concentrations of 0, 10, 30, and 50 wt% with thicknesses of 1 mm and irradiated by a pure beta-emitter source of Sr-90. To fabricate the electrodes, copper sheets with thickness of 100 µm were attached to the top and bottom surfaces of the samples using the silver paste. Then, electric current as the dosimetry response, was measured at various dose rates ranging from 30-102 mSv.h-1 at a fixed voltage of 400 V using an electrometer. Results showed that increasing the Bi2O3 wt% led to improvement in the dosimetry response linearly at various dose rates. Also, the amounts of sensitivities for the samples of 0, 10, 30, and 50 wt% were measured as 20.3, 19.8, 28.6, and 36.7 nC.mSv-1.cm-3, respectively. Regarding the mechanism of beta interaction with a polymer-heavy metal oxide nanocomposite, the Bremsstrahlung radiation can be considered as a dominant effect.
